Declaration Of Conformity (Doc); Technical Data - Reely Mini Freemen RC Allrad-Crawler Bedienungsanleitung

1. Press and hold the power button on the car until the status LED blinks rapidly.
2. Press and hold the power button on the remote control until the status LED S.LED blinks rapidly.
3. Wait a few moments for the binding process to complete.
à When the status lights on the car and remote control are steady ON, the binding process is complete.
9.3 Settings
Control Function Description
50/75/100 Speed control
ST-R Steering reverse
SR Steering range
ST Steering trim
CH4 Control lights
10 Operation
Note:
For various settings and adjustments, refer to section: 9.3 Settings.
1. Press and hold the power button on the remote to switch the power ON.
2. Press and hold the power button on the car to switch the power ON.
3. Control the car using the throttle and steering wheel.
4. When finished driving:
- Switch the car OFF
- Switch the remote control OFF
11 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage
the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the charger.
2. Clean the product with a dry, fibre-free cloth.

12 Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product con-
forms to the 2014/53/EU directive.
■
Click on the following link to read the full text of the EU declaration of conformity:
downloads
Enter the product item number in the search box. You can then download the EU declaration of conform-
ity in the available languages.
13 Disposal
13.1 Product
This symbol must appear on any electrical and electronic equipment placed on the EU mar-
ket. This symbol indicates that this device should not be disposed of as unsorted municipal
waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separ-
ately from unsorted municipal waste. Spent batteries and accumulators, which are not en-
closed by the WEEE, as well as lamps that can be removed from the WEEE in a non-de-
structive manner, must be removed by end users from the WEEE in a non-destructive man-
ner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste.
Conrad provides the following return options free of charge (more details on our website):
■
in our Conrad offices
■
at the Conrad collection points
■
at the collection points of public waste management authorities or the collection points set up by man-
ufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries
outside of Germany.
13.2 (Rechargeable) batteries
Remove batteries/rechargeable batteries, if any, and dispose of them separately from the product. Ac-
cording to the Battery Directive, end users are legally obliged to return all spent batteries/rechargeable
batteries; they must not be disposed of in the normal household waste.
Batteries/rechargeable batteries containing hazardous substances are labelled with this sym-
bol to indicate that disposal in household waste is forbidden. The abbreviations for heavy
metals in batteries are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our stores or
wherever (rechargeable) batteries are sold. You thus fulfil your statutory obligations and contribute to en-
vironmental protection.
Batteries/rechargeable batteries that are disposed of should be protected against short circuit and their
exposed terminals should be covered completely with insulating tape before disposal. Even empty batter-
ies/rechargeable batteries can contain residual energy that may cause them to swell, burst, catch fire or
explode in the event of a short circuit.

14 Technical data

14.1 Car
Rechargeable battery ............................. LiPo 3.7 V 500 mAh
4
Increase or decrease the max speed.
Reverse the steering input.
Increase / decrease the steering radius.
Adjust the steering trim so the car drives in a straight.
Switch the car lights ON/OFF.
Charging current..................................... max. 0.5 A
Battery recharge time ............................. approx. 60 mins
Runtime .................................................. approx. 70 mins
Speed ..................................................... max. 5 km/h
ESC ........................................................ yes
Ground clearance................................... 19.5 mm
Wheelbase.............................................. 142 mm
Tires (front & rear) .................................. Width:16 mm
Dimensions (W x H x L).......................... 105 x 101 x 254 mm
Weight .................................................... 268 g
14.2 Transmitter (remote control)
Input power............................................. 6 V/DC (4x 1.5 V AA batteries)
Frequency range .................................... 2410 - 2465 MHz
Transmission power ............................... 10 mW
Transmission distance............................ 80 m (open area)
Dimensions (W x H x L).......................... 135 x 90 x 185 mm
Weight .................................................... 158 g (without batteries)
14.3 Charging cable
Input ....................................................... 4.5 – 5.5 V via USB-A
Output..................................................... 4.425 V (outer: ø2.0 mm / inner: ø0.6 mm)
Wire length ............................................. 500 mm
Weight .................................................... 10.5 g
www.conrad.com/
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2595543_2595544_V1_0722_dh_mh_en 611289739-2 I1/O1 en
Diameter: 47 mm
Track width: 87 mm