Temperature Limit / Anti-Scalding Protection - STIEBEL ELTRON DHB-E 11 SLi electronic Bedienung Und Installation

INSTALLATION
Installation options

13.12 Temperature limit / Anti-scalding protection

The maximum temperature can be limited to 43 °C on the pro-
gramming unit of the appliance cover. For this, the following steps
are necessary:
f Remove the appliance cover. f
f Remove the electronic PCB from the programming unit of the f
appliance cover. Be careful with the snap-on hooks.
f Move the plug from left to right (position "43 °C"). f
f Refit the programming unit, ensuring the snap-on hooks f
click into place. Observe the positions of the push-button and
shaft.
CAUTION Burns
If operating the appliance with preheated water, the set
temperature limit and anti-scalding protection may be
ineffective.
f In this case, restrict the temperature at the upstream f
central thermostatic valve (see chapter "Installation /
Appliance description / Accessories").
www.stiebel-eltron.com DHB-E SLi | 33