Version F; Connection To External Gas Cylinder; Flexible Connection Hoses - CAN SL-Serie Handbuch Für Installation, Betrieb Und Wartung

OUTSIDE REMOVABLE GAS HOB UNITS ▪
ATTENTION!
During installation, connection and use, the flexible hose of the appliance must not be twisted,
pulled or subjected to any other mechanical/thermal stress which may jeopardise its tightness
and resistance.
ATTENTION!
Using naked flames to check tightness and put the device into service is strictly not allowed!

VERSION F

CONNECTION TO EXTERNAL GAS CYLINDER

ATTENTION!
Before installing the product, make sure you have a gas cylinder that is suitable for this type
of appliance, equipped with a regulator and proper connections (flexible hose and hose
connection or flexible hose and fitting), approved for the type of installation and in the country
of use (as required by standard EN484:2019 - Annex A - Table A.2 - Figures A.4).
ATTENTION!
Use certified hoses and components only.
Before connecting the gas, also check that:
▪
the supply line is free from obstructions and has a sufficient flow rate to guarantee correct operation
of the appliance;
▪
there is a suitable pressure regulator/reducer compliant with the gas categories used on the product
immediately downstream of the gas cylinder or container feeding the system;
▪
Check whether a type of fitting, hose connection, or connection suitable for use in the country of
installation/use, in accordance with technical standard EN 484, is installed at the end of the gas
supply line/appliance coupling.
ATTENTION!
Make sure that the type of gas feeding the appliance is among those allowed and listed in the
instruction booklet (see paragraph "Gas categories").
CAN S.r.l. declines any liability for incorrect connections, not carried out in a workmanlike manner or
performed by non-professionally qualified individuals.

FLEXIBLE CONNECTION HOSES

ATTENTION!
Before setting up the connection, make sure that the gas system and the connection terminals
are suitable for the intended purpose and comply with the national standards in force in the
Country of installation.
ATTENTION!
Always check the flexible hose for proper appearance and preservation (no abrasions, cuts,
deteriorations of any kind of the pipe plastic covering, etc ...) before each connection to the
gas system.
ATTENTION!
Connect the end of the hose to the hose connection, or to the fitting mounted on the appliance
according to the country of installation.
46
SL series