Assembly Of Telescopic Legs - CAN SL-Serie Handbuch Für Installation, Betrieb Und Wartung

ASSEMBLY OF TELESCOPIC LEGS

To position the appliance and fix the 4 telescopic legs, proceed as described:
step
1 Prepare the appliance and its supplied telescopic legs.
2 Place the cooking appliance on the floor or on a sufficiently stable raised surface, and rotate the product on
its side, being careful not to damage the glass lid and the gas train.
3 Screw the 4 telescopic legs into the appropriate threaded seats on the lower surface of the product, close to
the 4 corners.
Note: screw each leg up to the end of the stroke, and check couplings for sturdiness and tightness before
turning the product upside down
4 Place the product in an upright position and adjust the height of the legs at your discretion, based on the
needs of the moment (max H 800 mm from the floor).
1
3
action
2
Installation, use and maintenance instruction manual
4
max H from the
floor 800 mm
▪
Ed. 11/2019 Rev. 00
43