Troubleshooting - Grundig GEKW19400DX Benutzerhandbuch

new one. If it is type (B) model, pull it out
as shown in the figure and replace it with
a new one.

8 Troubleshooting

If the problem persists after following the in-
structions in this section, contact your
vendor or an Authorized Service. Never try to
repair your product yourself.
Steam is emanated while the oven is
working.
• It is normal to see vapour during opera-
tion. >>> This is not an error.
Water droplets appear while cooking
• The steam generated during cooking con-
denses when it comes into contact with
cold surfaces outside the product and
may form water droplets. >>> This is not
an error.
Metal sounds are heard while the
product is warming and cooling.
• Metal parts may expand and make sounds
when heated. >>> This is not an error.
The product does not work.
• Fuse may be faulty or blown. >>> Check
the fuses in the fuse box. Change them if
necessary or reactivate them.
• The appliance may not be plugged to the
(grounded) outlet. >>> Check if the appli-
ance is plugged in to the outlet.
• (If there is timer on your appliance) Keys
on the control panel do not work. >>> If
your product has a key lock, the key lock
may be enabled, disable the key lock.
Oven light is not on.
• Oven lamp may be faulty. >>> Replace
oven's lamp.
e. Refit the glass cover and wire shelves.
• No electricity. >>> Ensure the mains is op-
erational and check the fuses in the fuse
box. Change the fuses if necessary or re-
activate them.
Oven is not heating.
• The oven may not be set to a specific
cooking function and/or temperature. >>>
Set the oven to a specific cooking function
and/or temperature.
• The oven door may be open. >>> Make
sure the oven door is closed. If the oven
door remains open for more than 5
minutes, the time setting made for cooking
is cancelled and heaters do not work.
• For the models with timer, the time is not
set. >>> Set the time.
• No electricity. >>> Ensure the mains is op-
erational and check the fuses in the fuse
box. Change the fuses if necessary or re-
activate them.
(For models with timer) The timer dis-
play flashes or the timer symbol is left
open.
• There has been a power outage before.
>>> Set the time / Turn off the product
function knobs and again switch it to the
desired position.
The microwave does not work.
• It was not properly plugged in. >>> Plug
the cord.
• There might be an object between the
door and the oven. >>> Remove the ob-
ject and completely shut the lid.
EN / 48