First Use; First Timer Setting; Initial Cleaning - Grundig GEKW19400DX Benutzerhandbuch

4 First Use

Before you start using your product, it is re-
commended to do the following stated in the
following sections respectively.

4.1 First Timer Setting

Always set the time of day before
using your oven. If you do not set it,
you cannot cook in some oven mod-
els.
a. When oven is started for the first time the
time of day set on the oven is shown on
the display.
b. With the oven turned off (while the time of
day appears on the display), touch the
key for about 3 seconds to activate the
settings menu.
c. Touch the / keys until the
appears on the display.
d. Touch the key to activate the timer
field.
ð The timer field and the
flash on the display.
e. Set the time of day by touching the
keys and activate the minutes field by
touching the key again.
ð The minutes field and the
flash on the display.
f. Touch the
Confirm the setting by touching the
key.
ð The time of day is set and the
symbol

4.2 Initial Cleaning

symbol
a. Remove all packaging materials.
b. Remove all accessories from the oven
provided with the product.
c. Operate the product for 30 minutes and
then, turn it off. This way, residues and
layers that may have remained in the
oven during production are burned and
/
cleaned.
d. When operating the product, select the
highest temperature and the operating
function that all the heaters in your
product operate. See "Oven operating
functions [} 19]". You can learn how to
operate the oven in the following section.
e. Wait for the oven to cool.
symbol
f. Wipe the surfaces of the product with a
wet cloth or sponge and dry with a cloth.
Before using the accessories:
Clean the accessories you remove from the
oven with detergent water and a soft clean-
ing sponge.
EN / 25
/ keys to set the minute.
symbol illuminates continuously.
If the first timer setting is not per-
formed, the time of day starts from
12:00. You can change the time of
day setting later as described in the
"Settings" section.
In the event of a long power outage,
the time of day setting is cancelled.
It should be set again.
EN
DE