Grundig GEKW19400DX Benutzerhandbuch Seite 28

ð After the oven is turned on, the first op-
erating function is shown on the display.
The operating function, temperature and
baking time can be adjusted when the
display is in this status.
If no setting is made on this display,
the oven turns off in approximately 3
minutes and the time of day is
shown on the display.
Turning off the oven
Turn off the oven by touching the
The time of day is shown on the display.
Manual baking by selecting temperature
and oven operating function
You can cook by making a manual control
(at your own control) without setting the bak-
ing time by selecting the temperature and
operating function specific to your food.
a. Turn the oven on by touching the
b. Select the operating function you want to
cook with the function selection knob.
c. The pre-set temperature for the operating
function you selected appears on the dis-
play. Set the temperature you want to
cook with the temperature / power knob
if you would like to change this temperat-
ure.
d. After setting up operating function and
key.
the temperature touch the
baking.
ð Your oven starts operating immediately
key.
at the selected function and temperature
and the time passed appears on the dis-
play. On the display, the
bols are shown. As the temperature in-
side the oven reaches the set temperat-
ure, each stage of the oven temperature
not switch off automatically since
manual baking is done without setting
the baking time. You have to control
baking and turn it off yourself. When the
baking is completed touch the
to end the baking or touch the
turn off the oven completely.
Baking by setting the baking time;
You can have the oven turn off automatically
at the end of the time by selecting the tem-
perature and operating function specific to
your food and setting the baking time on
control unit.
a. Turn the oven on by touching the
b. Select the operating function you want to
cook with the function selection knob.
c. The pre-set temperature for the operating
function you selected appears on the dis-
play. Set the temperature you want to
EN / 28
If you change the operating function
after you change the pre-set tem-
perature of the operating function,
the last temperature set is shown on
the display. However, if the selected
temperature is not between the tem-
perature range of the selected oper-
ating function, the highest temperat-
ure for that operating function is dis-
played.
symbol will light up. The oven does
key to start
and sym-
key
key to
key.