Detailed Inverter Data - Danfoss CLX Serie Kurzanleitung

7. Application and Data
Illustration 7.4: Overview of Connected Inverters
Note:
The name of the inverter is fetched directly from the inverter. The name cannot be changed
via the Danfoss SolarApp. To change the name of the inverter, see the corresponding inver-
ter manual.

7.2.4. Detailed Inverter Data

7
To display the detailed production data of one of the connected inverters, select the name of
the particular inverter (see illustration, marked with red arrow) and the inverter details window
opens. The following information is displayed:
Name
Inverter name
Serial number
Power output
Production today
Operation mode
Latest event
Grid voltage for each phase V
Grid current for each phase
Grid frequency for each
phase
PV voltage for each PV input V
PV current for each PV input A
Power level adjustment
Table 7.1: Detailed Inverter Data
24
Unit Description
- Displays the name of the inverter.
- The serial number of the inverter.
W The current power output.
kWh Today's production.
- The current mode of operation of the inverter.
- When an inverter event is present, it is shown here.
Present grid voltage measured by the inverter. For each phase
(number of phases, depending on the inverter type) (AC side).
A Grid current measured by the inverter. For each phase (number
of phases, depending on the inverter type) (AC side).
Hz Grid frequency measured by the inverter. For each phase (num-
ber of phases, depending on the inverter type) (AC side).
For each PV input, the PV voltage measured by the inverter is
displayed (DC side).
For each PV input, the PV current measured by the inverter is
displayed (DC side).
% When the current power output of the inverter is limited, the
value is displayed here.
L00410601-06_5b