Danfoss CLX Serie Kurzanleitung Seite 12

Illustration 4.2: Power Management - Connections
The ripple control receiver is connected as follows:
Input Terminal Strip
+S
-S1
+S
-S2
+S
-S3
+S
-S4
+S
-S5
+S
-S6
A2-
A2+
A1-
A1+
Table 4.1: Ripple Control Receiver - Connections
To avoid damage to any product of the CLX Series and the ripple control receiver,
the connection must only be made by an authorised and suitably trained electri-
cian.
Note:
Further information on how to configure grid management via the integrated web interface
can found in the CLX Series user manual in the download area at www.danfoss.com/solar.
As default no grid management settings have been configured in the CLX Home GM or CLX
Standard GM, remember to configure the inputs/Relays according to the requirements from the
DNO. The configuration is carried out via the integrated web interface of the CLX Home GM or
CLX Standard GM.
Function Ripple Control Receiver Connector (K)
12-30 VDC
Relay input 1
12-30 VDC
Relay input 2
12-30 VDC
Relay input 3
12-30 VDC
Relay input 4
12-30 VDC
Not used
12-30 VDC
Not used
12-30 VDC
Analogue input
12-30 VDC
Analogue input
L00410601-06_5b
4. Installation
K1
K2
K3
K4
K5
K6
(0)4 .. 20 mA
(0)4 .. 20 mA
4
11