Mounting Material / Screw Connections - Paramondo Inverna 4000 Montageanleitung

52
Screw anchor pull-out forces
Fixing material
Before you start installation, please check with your conservatory manufacturer, at which
positions a conservatory awning may be installed or at which positions drilling and/or
screwing is not allowed.
The selection of the most suitable fastener depends on the type of mounting surface
(wood, aluminum, wood-aluminum constructions, steel, plastic) and its physical condition.
The fixing material must be selected according to the the mounting surface, the type of
mounting, the the pull-out forces/tensile strength and the max. tightening torques of the
screw connections.
It is the responsibility of the installer, to check the condition of the mounting condition of
the mounting surface before installing the awning.
If necessary, clarify with the manufacturer of the conservatory the use of the fixing
material.
Required screw extraction force
1000 mm
2000 mm
XXX
cm
3000 mm
4000 mm
SCREW CONNECTIONS
1000 mm
0,005
0,01
0,015
0,02
www.paramondo.de
XXX
cm
2000 mm 3000 mm
0,01 0,015
0,02 0,03
0,03 0,045
0,04 0,06
4000 mm 5000 mm
0,02 0,025
0,04 0,05
0,06 0,075
0,08 0,1