Paramondo Inverna 4000 Montageanleitung Seite 59

59
Mounting the awning
Ensure that you comply with the drilling depth specified by the screw anchor / anchor manufacturer and the manu-
facturer of your conservatory.
Internal side of
the guide profile
Channel A
Plate A
1
Assemble the height-adjustable guide supports and (optional) the brackets for the windbreaker. To do this, slide plate
A into channel A. Do not fully tighten the screws before checking dimensions.
2
Recommendation: For the following work step, it helps if you position the two guide rails so that the insides face
each other.
Position the spacer brackets and the windbreaker brackets in the positions mentioned in chapter „Correct positioning
of the brackets".
www.paramondo.de