Paramondo Inverna 4000 Montageanleitung Seite 61

Set up system:
Check rail parallelism (A) and perpendicularity (B) by diagonal measurement in both systems.
All guide profiles must be assembled straight in horizontal and vertical plane. The comparison values should not
exceed a tolerance of 10 mm.
Deviations in the parallel and diagonal dimensions of more than 10 mm lead to malfunctions. The diagonals
can be adjusted by moving the guide profiles vertically.
Now you can fully tighten the screws .
A
A
A
Left and right guide profile
Mounting the awning
B
B
www.paramondo.de
61