HBM Z16A Bedienungsanleitung Seite 6

Safety instructions
S The transducer must not be modified from the design or safety engineering
point of view except with our express agreement.
S The transducer is maintenance-free.
S In accordance with national and local environmental protection and material
recovery and recycling regulations, old transducers that can no longer be
used must be disposed of separately and not with normal household
garbage, see Chapter 8, Page 17.
Explosion protection version option
S Please comply with the relevant code of practice during installation.
S There must be compliance with the installation conditions cited in the
Certificate of Conformity and/or the Type Certificate.
Qualified personnel
Qualified persons means persons entrusted with the installation, fitting,
commissioning and operation of the product who possess the appropriate
qualifications for their function.
This includes people who meet at least one of the three following requirements:
S Knowledge of the safety concepts of measurement and automation
technology is a requirement and as project personnel, they must be familiar
with these concepts.
S As measurement or automation plant operating personnel, they have been
instructed how to handle the machinery. They are familiar with the operation
of the equipment and technologies described in this documentation.
S As commissioning engineers or service engineers, they have successfully
completed the training to qualify them to repair the automation systems.
They are also authorized to activate, ground and label circuits and
equipment in accordance with safety engineering standards.
Additional safety precautions
Additional safety precautions to meet the requirements of the relevant national
and local accident prevention regulations must be taken in plants where
malfunctions could cause major damage, loss of data or even personal injury.
4
A04000_03_Y00_00 HBM: public
Z16A