Connecting Outputs Between Multiple Modules (Power Supply Linking) - dB Technologies INGENIA IG1T Bedienungsanleitung

English

CONNECTING OUTPUTS BETWEEN MULTIPLE MODULES (power supply linking)

NOTE FOR THE INSTALLER (100-120V). The nameplate data on the speaker panel refer to (and are
limited to) the cable provided. If you do not use the supplied cable, the maximum allowed limits of
currents (and powers) of LINK are indicated in the following table:
IG1T (100-120 V)
The cables must be properly sized and design, installation and system testing should be performed
exclusively by qualified personnel. A.E.B. Industriale accepts no responsibility in case of use of
cables which are unsuitable, non-certified, non-compatible with the correct system sizing and the
regulations in force in the country of use.
POWER SUPPLY
INGENIA IG1T
All manuals and user guides at all-guides.com
Model
LINK
Current (100-120 V)
18 A
Powers (100-120 V)
1900 W
Cod. 420120237 REV. 1.1
49