Connections; Connecting And Linking The Power Supply; Connecting And Linking The Audio Signal - dB Technologies VIO X 310 Bedienungsanleitung

English

2. CONNECTIONS

CONNECTING AND LINKING THE POWER SUPPLY

On the VIO X310, you can link the power supply from the first speaker to the next, up to a total of 8 (7+1) in countries
with a 220–240Vac mains supply, and up to 5 (4+1) in countries with a 100–120Vac mains supply.
To supply power, simply connect the power cable provided to the MAINS INPUT on the first speaker and connect a
second cable with suitable connectors (optional) from the MAINS LINK output to the MAINS INPUT of the next speaker.
Repeat the connection to supply up to the maximum permissible current specified on the MAINS LINK connector of the
first speaker.
LOUDSPEAKER 2
LOUDSPEAKER 1

CONNECTING AND LINKING THE AUDIO SIGNAL

When connecting the system audio signal, connect the sound source to the "INPUT" of the first speaker first of all.
Then connect a balanced XLR cable from the "OUTPUT LINK" of the first monitor to the "INPUT" of the second,
and so on.
LOUDSPEAKER 1 LOUDSPEAKER 2
VIO X310 Cod. 420120424 REV. 1.0
29