Safety Devices - Maggi STEFF 2032 Betriebsanleitung

NB: The speeds listed in the tables
have been calculated from using the
power feeder with new rolls/tracks.
WARNING
The peripheral speed of the rools/
tracks decreases as their diameter/
surface wears out, and can get to
15% less than the initial speed.

3-4 SAFETY DEVICES

Before putting the unit into operation,
ensure that the dividing protection
(gearbox cover) has been adequately
screwed on.
3-5 FREE SPACES AROUND THE
MACHINE
The feeder unit shall be positioned in
such a way that there is sufficient free
space around it to avoid the danger of
crushing for the operator against the
workpiece being machined and other
machines or load-bearing structures.
Then, according to the size of the
workpiece, increase the free space by
0.5 meters in all directions.
3-6 USING THE POWER FEEDER
UNIT ON A CIRCULAR-SAW
MACHINE
The feeder must be so positioned on
the circular saw that the saw is
immediately after the input rollers (B)
and (C).
EN
Fig.14
43