Noise Emission; Transport; Setup Requirements - Maggi STEFF 2032 Betriebsanleitung

1-7 NOISE EMISSION

Below are listed, required by law, the
EN
noise data:
Machine type
LEQ (dbA)
Maximum noise level at work
post
These values are the same for all the
feeder models covered in this manual.

1-8 TRANSPORT

The power feeder STEFF is packaged
in one single box that contains both
the feeder and the support.
It is advisable to keep the packing
material for subsequent
requirements.
36
Packaging FEEDER
STEFF 2032
Packaging SUPPORT
Value
STANDARD Support
66,7
1050 Support
69,8
PLUS Support
V Support

1-9 SETUP REQUIREMENTS

We can only guarantee the problem-
free, long-lasting functionality and
precision of your machine and safe
operation if the following requirements
on the setup area are fulfilled.
transport - The machine must stand in a dry,
enclosed room with temperatures
between +10°C and +40°C.\
- There must be sufficient room
Mass
around the machine so the operator
36 kg
cannot be squeezed between the
machine and a wall when any
movable parts are estended.
Mass
- The power cable must be laid so the
37 kg
operator cannot trip over it.
41,5 kg
- The machine must be connected to a
43,5 kg
stable current supply with max.
44 kg
deviations of +/-10% in the rated
voltage.
- The machine ground wire must be
connected to the system ground
wire.