Clearing Error Message - Bose FeVac One Evacuation System Controller Installationsanleitung

Manual Settings

6.5 Clearing error message

Figure 16
System menu selection
Figure 17
Special menu selection
Figure 18
Error messages selection
Figure 19
Erase all error messages
18
From the initial display press the MENU button four times so that you see the following display.
VOLUME SYSTEM
KEY1 KEY2
Press T2 to select the system menu. The following display appears.
SPECIAL INSTALL
KEY1 KEY2
Press T1. The following display appears.
LAST ERROR CLR ALL
KEY1 KEY2
Press T1 to select error messages. The following display appears.
LAST ERROR ERASE
KEY1 KEY2
If you are sure that you want to erase all error messages, press T2 again.
Press the RESET button repeatedly to return to the initial menu.
4x