Audio Monitoring Of Alarm And Alert Messages - Bose FeVac One Evacuation System Controller Installationsanleitung

6.2 Audio monitoring of alarm and alert messages

Figure 9
Monitor menu display
Figure 10
Alarm/alert menu display
To listen to the pre-recorded alarm or alert messages on the FeVac
speaker, start at the initial menu and press the MENU button once. You see the following display.
MONITOR STATUS/VER
KEY1 KEY2
Press T1 to see the alarm/alert menu. The following display appears.
ALARM ALERT
KEY1 KEY2
Press T1 to hear the pre-recorded ALARM messages; press T2 to hear the pre-recorded ALERT messages.
These messages are only played on the unit's speaker.
Press the RESET button to stop the pre-recorded message and return the display to the initial menu.
One unit's built-in monitor loud-
®
15