Manual Settings And Monitoring Fevac Two; System Status Monitoring - Bose FeVac Two Amplifier/Speaker Controller Installationsanleitung

Manual settings and monitoring FeVac Two

4. Manual settings and monitoring FeVac Two

4.1 System status monitoring

10
When installation is completed, the measured parameters are stored in the FeVac
to the FeVac One. The next time the FeVac One carries out a check, it will only test the installed
components for possible errors.
The initial menu now reappears:
**** FEVAC 2 ****
SYSTEM XX : OK
The installation status of the various components attached to the FeVac Two system can be monitored
at any time.
**** FEVAC 2 ****
SYSTEM XX : OK
From the initial menu press the MENU key.
STATUS VERSION
KEY1 KEY2
Press Key T1 repeatedly to see the status of the installed amplifiers in turn.
(If no further key is pressed within 10 seconds, the FeVac Two automatically reverts to the initial menu.)
AMPLIFIER 1
INSTALLED
AMPLIFIER 2
INSTALLED
Two and passed on
®