Operation And Functions - Beem CM5020D-GS Bedienungsanleitung

EN

Operation and Functions

Operating Fields
The device has six operating fi elds:
Touch the fi eld (22) to switch the device on and off.
Touch this fi eld (30) to start / stop the grinding process for a single espresso or adjust the
quantity of espresso powder.
Touch this fi eld (23) to start / stop the grinding process for a double espresso or adjust
the quantity of espresso powder.
Touch this fi eld (24) to start / stop the brewing process for a single espresso or adjust the
quantity of water.
Touch this fi eld (26) to start / stop the brewing process for a double espresso or adjust
the quantity of water.
Touch this fi eld (25) to adjust the temperature.
The operating fi elds are simultaneously control lamps which indicate by fl ashing or being lit that
the respective functions are active.
The operating fi elds also have other functions assigned to them and they are explained in
detail in the corresponding chapters.
Control Lamps
The device has two control lamps:
STEAM / HOT WATER
CLEAN / DESCALE
Steam Power Control
The steam power control (8) is used to regulate the emission of steam and hot water (Picture C):
In this position no steam is emitted.
In this position steam is emitted.
In this position hot water is emitted.
When you switch on the device, always make sure that the steam power control is in the
position!
This control lamp (27) lights up as soon as the device has reached
operating temperature.
The dual-circuit thermoblock heating system makes it possible to
brew espresso at any time and froth milk with steam without having
to wait for the temperature to adjust.
This control lamp (29) lights up when the device needs to be
descaled and during the descaling process.
32