Herunterladen Inhalt Inhalt Diese Seite drucken

Setting Up And Connecting The Device; Handling And Operation; Display Lighting - Beem FRESH-AROMA-PERFECT Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für FRESH-AROMA-PERFECT:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
25
When the device is first used, production-related additives (e. g. grease) may cause
a small amount of smoke and / or an odour to be produced. This is normal and not a
device defect.
4. Repeat this process twice. Do not drink this coffee!
5. Clean the device and accessories (see the "Cleaning and Care" chapter).

Setting Up and Connecting the Device

PLEASE NOTE!
Only connect the device to a socket that is properly installed and matches the technical
data of the device. The socket must also be readily accessible after connection so that
the connection to the mains can quickly be isolated.
Lay the connecting cable in such a way that it does not become squashed or bent and
does not come into contact with hot surfaces (also applies to the hot surfaces of the
device!).
Do not use the device in conjunction with extension cables.
Always set up the device with a clear space at the sides (at least 20 cm) and clear space
above it (at least 30 cm) on a flat, solid and heat-resistant surface that is resistant to
splashing.
Do not place the device below kitchen wall units or similar cupboards. The rising steam
could cause damage to them!
1. Place the device on the kitchen unit or another dry, clean work surface, following the safety
notices and the notices provided at the beginning of this chapter.
2. Pull the connecting cable out of the cable compartment and plug it into a plug socket.

Handling and Operation

Display Lighting

The display lighting goes out 60 seconds after the last button has been pressed, unless the
device is in operation. Press any button you want to switch on the display lighting.
Further actions can only be carried out once the display lighting has been activated.
Time
As soon as the mains plug is plugged into a plug socket, the display lighting turns on and the
time display 12:00 flashes. The clock has a 24-hour time format.
1. Set the hours by pressing the button H (22).
EN

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

0204102049

Inhaltsverzeichnis