Wiring (Cinch) - T+A CRITERION Serie Betriebsanleitung

Cinch wiring connections
(Automatic power-on via music signal)
If your pre-amplifier does not feature a suitable switch
voltage, it is possible to switch on the loudspeakers by
the presence of a music signal.
This is achieved by moving the CTRL/
switches on the back panel of the TCI to the
AUTO positions respectively.

and AUTO/ON
   
and
33
The loudspeakers are then switched on when a music
signal is present; they switch themselves off auto-
matically after about 30 minutes without a music signal.