Wiring (Cinch) - T+A CRITERION Serie Betriebsanleitung

Cinch wiring connections
(Automatic power-on using control cable)
If your pre-amplifier does not feature XLR outputs, the
loudspeakers are connected using Cinch cables.
If you are using a pre-amplifier with a suitable switch
voltage output (e. g.  P 1230 R) it is also straight-
forwardly possible to switch the speakers on auto-
matically.
This is achieved by connecting the pre-amplifier to the
CTRL input on the loudspeaker using a suitable cable,
and moving the CTRL/
rear panel of the TCI to the CTRL and AUTO positions.
The speakers are then switched on and off by the
pre-amplifier.
32

and AUTO/ON switches on the