Wiring (Xlr) - T+A CRITERION Serie Betriebsanleitung

General
The cables employed in any Hi-Fi system have a crucial
influence on the sound of the system as a whole. For this
reason  has developed its own range of cables
which includes the ideal type for every application.
XLR wiring connections
If your pre-amplifier features XLR outputs, XLR wiring
should be used in order to exploit its very great rejection
of stray fields.
If you are using the 4-pin XLR module available as an
option for the P 1230 R, it is also possible to switch on
the loudspeakers conveniently without additional cabling.
Wiring
These cables are designed to match the special charac-
teristics of our loudspeakers. Please note that all the
cables used should be the same length!
Please move the CTRL/
the rear of the TCI cabinet) to the CTRL and AUTO
positions respectively. The speakers are then switched
on and off by the pre-amplifier.
If your pre-amplifier only features a 3-pin XLR output
socket, a suitable adaptor is required to complete the
connections.
31

and AUTO/ON switches (on