Inhaltsverzeichnis
Werbung
6) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Additional safety warnings for orbital
sanders
Contact with or inhalation of dust coming
free during use (e.g. lead-painted
surfaces, wood and metal) can endanger
your health and the health of bystanders.
Always wear appropriate protective
equipment, such as a dust mask. Always
use proper dust extraction during use.
• Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
• Do not use the machine for sanding magnesium
workpieces.
• Wear safety goggles. Wear hearing protection.
If necessary, use other protective means, such
as safety gloves, safety shoes, etc.
• Hold the machine by the insulated gripping
surfaces where the accessory may contact
hidden wiring or the mains cable. If the
accessory contacts a ‚live' wire, the exposed
metal parts of the machine can also become
‚live'. Risk of electric shock.
• Be very careful when sanding painted surfaces.
• Before use, remove all nails and other metal
objects from the workpiece.
• Make sure that the workpiece is properly
supported or fixed.
• Only use sanding paper that is suitable for use
with the machine.
• Only use sanding paper with the correct
dimensions. Make sure that the sanding paper
is properly mounted.
• Inspect the sanding paper before each use. Do
not use sanding paper that is worn because of
prolonged use.
• Never put the machine down on a table or a
workbench before it has been switched off.
Electrical safety
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate.
• Do not use the machine if the mains cable or
the mains plug is damaged.
• If the replacement of the supply cord
is necessary, this has to be done by the
manufacturer or his agent in order to avoid a
safety hazard.
• Only use extension cables that are suitable for
the power rating of the machine with a minimum
thickness of 1.5 mm2. If you use a extension
cable reel, always fully unroll the cable.
Technical data
Model No.
Mains voltage
Mains frequency
Power input
No-load speed
Weight
NOISE AND VIBRATION
Sound pressure (L
)
pa
Acoustic power (L
)
wa
Vibration
Wear hearing protection.
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with a
standardised test given in EN 62841-1, EN 62841-2-4;
it may be used to compare one tool with another and
as a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned:
- the vibration emission during actual use of the
power tool can differ from the declared total
value depending on the ways in which the tool
is used;
- need to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such
as the times when the tool is switched off and
when it is running idle in addition to the trigger
time).
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
ESM1015
230-240 V~
50 Hz
300 W
6,000 - 13,000 min-1
2.1 kg
77.7 + 3 dB(A)
88.7 + 3 dB(A)
4.758 + 1.5 m/s2
5
Werbung
Inhaltsverzeichnis
