3.3 Product safety
3.3.1 Intended use
The device is intended for light grinding and cutting work, and work with suitable wire
brushes.
3.3.2 Foreseeable misuse – NOT PERMITTED –
The device is not suitable for use with liquid coolants or lubricants. Furthermore, the
device must not be used for polishing and/or grinding surfaces with diamond wheels and
with diamond or hard ceramic wheels.
3.4 Hazard warnings
3.4.1 General hazard warnings
• Protect the device against heat, open flame, water and moisture. There
is a risk of explosion.
• Work on the electrical equipment must be performed by a qualified elec-
trician, or by a trained person supervised and guided by an electrician in
line with electrical technology rules.
• Only use the device with compatible 18 V batteries by STORCH. There is
a fire hazard.
• Do not cover the ventilation slots of the device. The device may overhe-
at. There is a fire hazard.
• Prevent ingress of liquids such as water and polish. There is a risk of
electric shock.
• Keep a tight hold on the device. Secure loose workpieces with a clamping
device or vice.
• Wait for the device to come to a standstill before depositing it.
• If the device is snagged, this can lead to loss of control over the tool.
• Always use appropriate protective equipment, eye and ear protection, and
a respiratory protection mask during use.
• Keep children and other persons away from the device when using it. If
you are distracted, you can lose control over the power tool.
GB
45