AEG Powertools WS 650-115 Gebrauchsanleitung Seite 3

Measured
sound value
Measured
vibration value
Usage
Mains
connection
Switching on
and off
Smooth start
ENGLISH
The adjusting nut must be tightened before starting to work with the machine.
Under extreme operating conditions (e. g. smoothing metals with the backing pad
and vulcanised fibre-grinding disks) high contamination can build up inside the an-
gle grinder. In such cases we recommend: the use of a stationary dust extraction
device; cleaning the machine more regularly; and/or the use of an ELCB safety
switch (earth leakage circuit breaker).
Typically the A-weighted noise levels of the tool are:
Sound pressure level = 85 dB (A).
Sound power level =
Wear ear protectors!
Typically the weighted acceleration is 5 m/s
This angle grinder can be used for separating and grinding many different materials,
e.g. metal or stone. In case of doubt please read the manufacturers' instruction.
Do not use this product in any other way as stated for normal use.
Connect only to a single-phase AC current supply and only to the mains voltage
specified on the rating plate. Connection to sockets without earth protection is pos-
sible as the appliance features protective insulation to DIN 57 740/ VDE 0740 and
CEE 20. Radio suppression complies with the European standard EN 55014.
When fitting the plug, make sure that the brown (live) wire of this appliance is con-
nected to the plug terminal marked L or coloured red, and the blue (neutral) wire of
this appliance is connected to the plug terminal marked N or coloured black. Under
no circumstances must the wires of this appliance be connected to the earth termi-
nal of the plug marked either E, with the earth symbol, or coloured green or green/
yellow.
Switching on and off: Slide back the On/Off
switch. To lock, depress the front part of the slid-
ing switch.
Switching off: To unlock, depress the back part
of the sliding switch. The switch will automatically
move back to "O".
The electronic smooth start will prolong the life of both the motor and the gears.
3
98 dB (A).
2
.
WS 650-115, WS 715-115, WS 715-125, WSE 800-125
1
2