Herunterladen Inhalt Inhalt Diese Seite drucken

Truma Mover XT L Gebrauchsanweisung Seite 30

Vorschau ausblenden Andere Handbücher für Mover XT L:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Product description
system comes to an imediate standstill for safety re-
asons if radio frequency interference occurs� It is im-
possible for other radio signals to set the manoeuvring
system in motion�
Fig. 6
ON / OFF
Switch on / switch off (slide switch on the
side)
SLIDE CONTROL
Drive forward and in reverse
CONTROL KNOB
Drive to the left (in an anti-clockwise di-
rection) and to the right (in a clockwise
direction)
ENGAGE
Drive rollers engaged
DISENGAGE
Drive rollers disengaged
4.5.2 The remote control's symbols and acoustic
signals
Symbol
Colour Meaning
Red
Warning – power supply / Mover
battery's charging status
Yellow
Short-term malfunction or
warning
Red
Continuous fault
Green
Radio connection status
Sym-
Display
bol
Switch on and normal operation
30
EN
Meaning
Sym-
Display
bol
Flashes slowly
Lights up
continuously
Flashes rapidly
with acoustic
signals
Flashes slowly
Flashing with
acoustic signals
Switch on, special process
Lights up
Flashes with
acoustic signal
Sym-
Display
bol
No button is pressed on the remote control for some
time
Flashes rapidly
with acoustic
signals
Mover XT L
Meaning
Once the remote control
is switched on, the radio
connection is established
(this takes approx� 5 se-
conds)� Wait until the data
link is stable
Remote control and con-
trol unit are ready for ope-
ration, data link stable
If a data link has not been
established after 10 se-
conds, the remote control
switches off� The control
unit may not be switched
on, or the 13-pole plug
may not be plugged into
the safety socket
During engagement and
disengagement, 1 acou-
stic signal indicates the
start of the process, and 2
acoustic signals indicate
the end of the process
Radio connection was in-
terrupted� Reduce the dis-
tance between the remote
control and caravan (or
remedy the malfunction)
and switch the remote
control back on again�
The last engagement or
disengagement was not
completed:
Operation is only possible
when engagement or di-
sengagement is repeated�
Activate engagement or
disengagement and wait
until it is complete�
Meaning
The remote control swit-
ches off
60020-00214 ∙ 00 ∙ 08/2022

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis