Parkside PFBS 12 B6 Originalbetriebsanleitung Seite 16

Notes on working with materials/tools/speed range
■ Use the milling bits
■ Determine the rotational speed range for working on zinc, zinc alloys, aluminium and
copper by trying it out on test pieces .
■ Use a low rotational speed for work on plastics and materials with a low melting point .
■ Use a high rotational speed for working on wood .
■ Carry out cleaning, polishing and buffing work in the medium speed range .
The following are recommendations only and not binding . When carrying out practical
work, carry out your own tests to see which tool and which
settings are ideal for the material you are working on .
Set a suitable rotational speed
Number on the speed control
1–3
4–5
5
6
Max
Application examples/selecting a suitable tool
Function
Drilling
Milling
Engraving
Polishing, rust removal
CAUTION! Exert only
a light pressure when
applying the tool to the
workpiece .
PFBS 12 B6
for working on steel and iron at maximum speed .
Material being worked
Plastics and materials with a low melting point
Stone, ceramics
Soft wood, metal
Hardwood
Steel
Accessories Use
Working wood
HSS drills
Various jobs; e .g . creating
recesses, hollows, forms,
Milling bit
grooves or slits
Labelling, handicrafts
Engraving bits
Rust removal
Metal brush
Various metals and plastics,
Polishing
especially precious metals
discs
such as gold and silver
Protrusion mm
(min–max)
18–25, using
the smallest
drill, the protru-
sion is 10 mm
18–25
18–25
9–15
12–18
GB │ CY │
13 ■