Inhaltsverzeichnis
Werbung
SPARE PARTS LIST FAG-125N
POSITION
DESCRIPTION
6
PINION GEAR
11
ARMATURE
18
SIDE HANDLE
23
SPINDLE GEAR
31
PROTECTING COVER
33
FLANGE INSIDE
35
FLANGE OUTSIDE
37
STATOR
38
SLIDE SWITCH KNOB
40
SWITCH DRAW BAR
43
CARBON BRUSH HOLDER
44
CARBON BRUSH
45
CARBON BRUSH CAP
50
SWITCH
58
WRENCH
42
FERM NR
406068
ANGLE GRINDER
406069
406274
THE NUMBERS IN THE FOLLOWING TEXT
406070
CORRESPOND WITH THE PICTURES AT PAGE 2
406071
406846
406847
machine works, and how it should be operated. Maintain the
machine in accordance with the instructions, and make
406072
certain that the machine functions correctly. Keep this
406073
operator's guide and other enclosed documentation with the
406074
machine.
406075
CONTENTS:
406076
1. Machine data
406077
2. Safety instructions
3. Assembly
406078
4. Use
406814
5. Service & maintenance
1. MACHINE DATA
INTRODUCTION
This machine is developed for grinding and roughing of
metal and stone. With help of the correct accessories
the machine can also be used for brushing and sanding.
PACKAGE CONTENTS
1 Angle grinder
1 Side handle
1 Spanner
1 Instruction manual
1 Safety instructions
1 Warranty card
TECHNICAL SPECIFICATION
Voltage
Frequency
Power input
No-load speed
Disc diameter
Spindle dimension
Weight
Lpa (sound pressure)
Lwa (sound power)
Vibration value
FEATURES
Fig.1
1. ON/OFF-switch
2. Guard
3. Side handle
4. Grinding disc
5. Spindle lock
Ferm
Ferm
Read this operators guide carefully, before using
the machine. Ensure that you know how the
| 230 V~
| 50 Hz
| 880 W
| 11000/min
| 125 mm
| M 14
| 2,5 kg
| 89 db(A)
| 102 db(A)
| 1.16 m/s
2
2. SAFETY INSTRUCTIONS
EXPLANATION OF SYMBOLS
In this manual and/or on the machine the following
symbols are used:
Read instructions carefully
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation – You don't
need any earthed plug.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains
electricity in the case that the cord gets
damaged and during maintenance
Keep bystanders away
Risk of fire
Wear ear and eye protection
Wear protective gloves
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the
appropriate recycling locations.
SAFETY INSTRUCTIONS
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions. Keep these
instructions in a safe place!
•
Check that the maximum speed indicated on the
grinding disc corresponds to the maximum speed of
the machine. The speed of the machine must not
exceed the value on the grinding disc.
•
Make sure that the dimensions of the grinding disc
correspond to the specifications of the machine.
•
Make sure that the grinding disc has been mounted
and fastened properly. Do not use reducing rings or
adapters to make the grinding disc fit properly.
•
Treat and store grinding discs in conformance with
the supplier's instructions.
3
Werbung
Inhaltsverzeichnis
