Troubleshooting - newgen medicals MS198301 Benutzerhandbuch

Troubleshooting:

Problems
S/N
The product will
1
not start
A humming sound
2
is generated when
the device is in
motion
The product does
3
not respond to the
controller
The product
4
suddenly stops
moving
5
Uncontrollable
"ER01" or "ER02"
6
appear on the
screen
Note: please do not attempt to disassemble and repair the device. Contact
your local after-sales personnel for assistance.
Causes
The power cord is
not plugged in
The power switch is
not turned on
A fuse is blown
This sound is produced
when the motor
or another product
accessory is worn
The controller's batteries
are exhausted
The remote is too far away
from the device
The product's default
movement time has
ended
The product crashes after
simultaneously receiving
too many instructions
Motor Work Current Failure
1 6
Solutions
Plug in the power cord
Turn on the power switch
An indicator light
should illuminate
Replace it with the same
model of fuse
No repair required
Change the batteries
The remote's effective
signal is 2.5m
Restart the device after
10 minutes
Turn off the power and
restart the device
Turn off the power
supply, insert the power
cord plug, and restart.
If this does not work,
contact the after-sales
personnel.
EN