newgen medicals MS198301 Benutzerhandbuch Seite 32

Remote Control Instructions
1. Plug in the power cord and press the power switch. When "---" appears on
the display, the device has entered standby mode.
2.
Press the Power Button and the screen will enter default status,displaying
" TIME, 10:00,
3.
In Manual Procedure, press one of 7 function symbol buttons to select a
corresponding mode. Press the Increase Time or Decrease Time buttons
to select between 1-10 minutes (the default time is 10 minutes).
4.
Press Mode to select automatic programming: for P1, P2, or P3, press P1,
P2 or P3. (Cyclical display)
5.
After selecting a function, mode, or time, press Start/Stop to activate the
device. To select another function or program, press the Start/Stop button
to stop the device and return to default status.
6.
While the device is moving, press the Increase Speed or Reduce Speed
buttons to adjust the speed from between 1-30 (the display switches
between time and speed every 5 seconds).
Standby Status:
In default mode, if no selections are made for three minutes, the screen
will automatically enter standby status.
When starting up the device or while in default status, press the Power
Button to enter standby status. " ---" will appear on the screen.
The screen displays time in a countdown format
Note: the effective range of the remote control is 2.5 meters.
" .
1 0
EN