newgen medicals MS198301 Benutzerhandbuch Seite 28

1. Plug in the power cord and press the power switch. When " ---" appears on
the display, the device has entered standby mode.
Press the Power Button and the screen will enter default status, displaying
2.
" TIME, 10:00 ,
3. Manual Mode features 7 functions.
Lightly press the Function Button to select on of the following ７functions, then press
Increase Time or Decrease Time to select a time period ranging from 1-10 minutes
(the device's default setting is 10 minutes).
Function 1: Fat Burning Function
adjustment, press Start/Stop to activate the device. While the device is moving, press
the Increase Speed or Reduce Speed buttons to adjust the speed from between 1-120
(the display switches between time and speed every 5 seconds). To select another
function or program while using the device, first press the Start/Stop Button and the
device will return to default mode.
Function 2 : Horizontal Motion Function
screen will display " TIME. 10:00,
device is moving, press the Increase Speed or Reduce Speed buttons to adjust the
speed from between 1-120 (the display switches between time and speed every 5
seconds). To select another function or program while using the device, first press the
Start/Stop Button and the device will return to default mode.
Function 3: Vibration Function
will display " TIME. 10:00,
is moving , press the Increase Speed or Reduce Speed buttons to adjust the speed
from between 1-120 (the display switches between time and speed every 5 seconds).
To select another function or program while using the device, first press the Start/Stop
Button and the device will return to default mode.
Function 4: Fat Burning + Horizontal Motion Function
three times and the screen will display " TIME. 10:00
the device. While the device is moving , press the Increase Speed or Reduce Speed
buttons to adjust the speed from between 1-120 ( the display switches between time
and speed every 5 seconds). To select another function or program while using the
device, first press the Start/Stop Button and the device will return to default mode.
"
. The display will show the default status. After
" . Press Start/Stop to activate the device. While the
. Press the Function Button twice and the screen
" . Press Start/Stop to activate the device. While the device
0 6
. Press the Function Button once and the
. Press the Function Button
" . Press Start/Stop to activate
EN