Klarstein EMERALD 5 SLIM Bedienungsanleitung Seite 70

EN
70
Error codes
If a malfunction occurs, the dishwasher indicates the cause by the corresponding
error code.
Code Meaning
E1 The water intake takes
a very long time.
E3 The required
temperature is not
reached.
E4 The dishwasher is
leaking.
Ed Communication
between the display
module and the control
module is interrupted.
Potential cause
The water supply is interrupted, the tap is
closed or the water pressure is too low.
Malfunction of the heating element.
This can be caused by large dishes that
prevent the door from closing properly.
Defect in the pump-down system or
defective seal.
Wiring error between both modules.