Klarstein EMERALD 5 SLIM Bedienungsanleitung Seite 50

EN
50
Draining the Water
Connect the water drain hose. The drain hose must be correctly fitted in order
to. Avoid water leaks. Make sure that the water drainage hose is not kinked or
crushed.
Power connection
• Do not use an extension cord or adapter plug in combination with this
appliance.
• Do not cut or remove the earth wire of the mains cable under any
circumstances.
• Refer to the rating plate for the rated voltage and only connect the dishwasher
to an appropriate power source.
• Use the required 10-amp fuse, delayed fuse or recommended circuit breaker
and provide a separate circuit that supplies power only to this appliance.
• Make sure that the voltage and frequency of the power supply correspond to
the specifications on the type plate.
• Only insert the plug into a socket that is properly earthed. If the socket to
which the appliance is to be connected is not suitable for the plug, have
the socket replaced by a qualified electrician instead of using an adapter or
similar, as this may result in overheating and cause a fire hazard.
Note: Make sure there is proper earthing before use.
Power supply:
220-240 V AC 50 Hz
Outlet:
10 A 250 V AC