Klarstein EMERALD 5 SLIM Bedienungsanleitung Seite 53

There are a total of 6 salt consumption levels. It is recommended to select the
stage according to the information in the table below:
Water hardness
1) 2)
°dH Mmol/l
0-5 0-0.94
6-11 1.0-2.0
12-17 2.1-3.0
18-22 3.1-4.0
23-24 4.1-6.0
35-55 6.1-9.8
1) German unit of measurement for water hardness
2) Millimol, international unit of measurement for water hardness
3) Factory setting
4) Refill water softener. The water softener must be refilled regularly to ensure
the water softening function. An additional 0.2 litres of water must be added
for each refill. The energy consumption is increased by 0.01 kWh and the
programme is extended by 4 minutes.
Contact the local waterworks for information on the water hardness of your
water supplier.
Adjusting Renewal takes place
the water after all X program-
softener me sequences
H1 No
H2
3)
H3
H4
H5
H6
Salt
consumption
4)
(gram/cycle)
0
10 4
5 8
3 13
2 20
1 40
EN
53