Proper Use; Technical Data - EINHELL TP-RO 18 Li BL Originalbetriebsanleitung

•
Cordless routing unit
•
Router insert
•
Extractor adapter
•
Compass point
•
Clamping sleeve 6+8mm
•
Parallel stop
•
Open-ended wrench (2x)
•
Safety guard
•
Original operating instructions
•
Safety instructions

3. Proper use

This cordless router is designed primarily for the
machining of wood and plastic. Its uses include
the cutting out of knots, the cutting of slots, the
forming of recesses, the copying of curves and
lettering, fl ush-trimming, etc. This cordless router
is not allowed to be used for the machining of
metal, stone, etc.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Motor power supply: .................................... 18 V
Idling speed: .......................10,000 - 30,000 min
Stroke height: ................... 40 mm (routing depth)
Clamp: ............................... Ø 8 mm and Ø 6 mm
For routing cutters max.: ........................... 30 mm
Weight Cordless router: ............................ 2.4 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
L sound pressure level ..................... 80.4 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ........................ 91.4 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Anl_TP-RO_18_Li_BL-Solo_SPK13.indb 20
GB
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841.
Handle
Vibration emission value a
K uncertainty = 1.5 m/s
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
-1
Limit the operating time!
All stages of the operating cycle must be conside-
red (for example, times in which the electric tools
are switched off and times in which the tool is
switched on but operates without load).
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
- 20 -
= 1.983 m/s
2
h
2
11.07.2022 08:42:29