Bt Functions - capital sports Helios Bedienungsanleitung

EN
42

BT FUNCTIONS

A wireless transmitter is built into the unit. The wireless transmitter is a BT 4.2
device. The operating frequency is 2.4 GHZ.
Requirements for the app installation on the smartphone
• The iOS operating system should be no lower than version 7.1 and
support BT 4.2; iPhone 4s and higher.
• For Android, an operating system of at least 4.3 is required and BT 4.2
must be supported.
• To ensure that the data recording on the mobile phone side is genuine
and effective, the wireless transmitter records the user's data and sends it
to the smartphone app only when the BT computer and mobile phone are
connected. To ensure the accuracy and effectiveness of the data recorded
in the smartphone app, connect the app to the BT computer first before
starting the sports equipment.
• The computer switches to sleep mode if it does not receive an input
signal within 2 minutes. In sleep mode, the computer is no longer
available to the smartphone. At this time, you must press a button to
reactivate the computer.
• The BT function of the computer is switched off by default. Before
connecting an app, press any button on the computer to activate BT.
• If no app is connected and no button is pressed within 60 seconds after
activating BT, the BT function of the computer is deactivated again.
• When the computer is successfully connected to the app, the computer
turns off the screen and all data is displayed in the app.
• If you want to use the computer again after connecting the app, you must
close the app and deactivate the BT function of the smartphone.