capital sports Helios Bedienungsanleitung Seite 31

EN
2
Unscrew the four Phillips screws (59) which are pre-installed on the back
of the control panel (37). Connect the bottom of the three sensor wires (65)
to the three sensor wires of the main frame (1). Insert the control panel
support tube (47) into the main frame (1). Secure this with a washer (14)
and an Allen screw (63). Connect the top of the three sensor wires (65) to
the three sensor wires on the control panel (37). Attach the control panel
(37) and the tablet holder (75) to the control panel holder and tighten them
with the four Phillips screws (59).
Note: Please alway ensure the connectors of the sensor wires are
connected together in the same color.
31