Console And Key Functions - capital sports STREAM M1 Handbuch

CONSOLE AND KEY FUNCTIONS

Key functions
MODE Press MODE to select functions.
SET Press SET to set the target values of TIME, COUNT, DISTANCE,
CALORIES and PULSE.
RESET Press RESET to reset the values of TIME, COUNT, DISTANCE,
CALORIES and PULSE.
Functions and Operation
Press the MODE button until SCAN appears. The console scrolls
SCAN through all 5 functions: Time > Count > Distance > Calorie and Pulse.
Each display is displayed for 6 seconds.
Count the total time from start to finish.
Press the MODE button until TIME appears. Press the SET button to
TIME
set the workout time. The display will automatically count down from
the target during the workout.
Count the number of strokes from start to finish.
Press the MODE button until COUNT appears. Press the SET button to
COUNT
set the number of strokes. The display will automatically count down
from the target during the workout.
Count the distance from the beginning to the end of the workout.
Press the MODE button until DIST appears. Press the SET button to set
DISTANCE
the training distance. The display will automatically count down from
the target during the workout.
Count total calories from start to finish.
Press the MODE button until CAL appears. Press the SET button to set
CALORIES
the training calories. The display will automatically count down from
the target during the workout.
Press the MODE button until PULSE appears. Before you measure
your heart rate, please wear the chest strap and the console will display
your current heart rate in beats per minute (BPM) on the LCD display
after 6~7 seconds. During heart rate measurement, the reading may be
PULSE
higher than the actual heart rate for the first 2~3 seconds.
Note: A chest strap is required for heart rate measurement. The
chest strap is NOT included. The measured value does not serve as a
basis for medical treatment!
EN
35