Operating Elements - Soehnle Professional 6730 Gebrauchsanweisung

7. Product description

7.2 Operating elements

Button Designation
ON/OFF
[Ein/Aus]
PRINT
[Drucken]
kg/lb
Zero
[Null]
Hold / Release
[Halten /
Entlasten]
BMI
UP / DOWN
[Nach oben /
unten]
CLEAR
[LÖSCHEN]
ENTER
[EINGABE]
42
Function
Turns the scale on or off.
Currently no function.
Resets the scale to zero. The reset to zero within three seconds. This
function is only possible if the weight is displayed stable. Zeroing up
to 2% of the full weight.
If „HOLD" is shown in the display, the current weight value appears
together with the „HOLD" display by pressing this key.
If „HOLD" is not shown in the display and the scale is unloaded, the
„HOLD" display goes out.
This key is not active in the BMI mode.
Calling up the BMI mode. Only possible if a weight is shown on the
display and this function has been activated in the settings.
To set the value/number that flashes.
When the height is displayed in BMI mode, the value is reset to the
default value (170.0 cm).
If this key is pressed when the calculated final BMI value is displayed,
the scale returns to the weighing mode.
Confirmation of the last parameter entered and call of the
next step.
By keeping this key pressed during the power-on procedure of the
scale
the ID display is called up (pre-parameter mode).