Kalor Ermetica 98 Cast Round 10C Bedienungsanleitung Seite 44

GENERAL GUARANTEE
All products are subject to accurate testing and are covered
by warranty for 24 months from the date of purchase,
documented by invoice or purchase receipt that will be
presented to authorized technicians. If the document does
not show up, it will be invalidate the right of the owner of
the appliance. Warranty means the replacement or repair
of parts of the appliance that are defective at source due to
manufacturing faults.
1. Warranty covering manufacturing defects and defects in
material declines:
- for unauthorized personnel work;
- for damage caused by transport or for causes not
attributable to the manufacturer;
- for incorrect installation;
- for incorrect electrical connection;
- for periodic maintenance not performed;
- for outdoor accidents (lightning, floods, etc ...);
- for incorrect use and maintenance.
2. Complete replacement of the machine can only take
place following the unquestionable decision by the
manufacturer in special cases
3. The Company declares no responsibility for any damage
that may, directly or indirectly, result in persons, things or
animals as a result of non-observance of the instructions
in the Instructions book and in particular concerning the
installation, use and maintenance of the appliance.
22
GUARANTEE LIMITATIONS
Limited Warranty covers manufacturing defects, provided
that the product has not been damaged by improper use,
improper handling, incorrect connection, tampering, and
installation errors. The following components are covered
by a twelve months warranty:
- combustion burners;
- resistance.
They are not covered by warranty:
- the glass of the door;
- general gasket and fiber door;
- painting;
- tiles;
- the remote control
- Internal sides
- Any damage caused by inadequate installation and / or
shortages of the consumer.
The images are purely indicative and may not match the
reality of the product. Pictures are only examplary and they
are needed to understand how the product works.