Kalor Ermetica 98 Cast Round 10C Bedienungsanleitung Seite 23

Dear Customer,
We thank you for having chosen one of our products, the fruit of technological experience and of con-
tinual research for a superior quality product in terms of safety, dependability, and service. In this manual
you will find all the information and useful suggestions to use your product with the maximum safety
and efficiency.
We highly recommend to turn to our Authorized Service Centre for the installation
and the first ignition of the device as it not only carries out the installation
perfectly but also verifies the regular operation of it.
• Incorrect installation, incorrectly performed maintenance, improper use of the product release the
manufacturer from every eventual damage derived from the use of the stove.
• The unit cannot be used as an incinerator. Do not use fuels other than pellets.
• This manual has been realized by the manufacturer and constitutes an integral part of the product
and must remain with it during its entire lifetime. If the product is sold or transferred, be sure that the
booklet is present since the information contained in it are addressed to the buyer, and to all those
persons of various titles who complete the installation, use and maintenance.
• Carefully read the instructions and the technical information contained in this manual, before pro-
ceeding with the installation, use, and any operation on the product.
• The observance of the indications contained in the present manual guarantees the safety of people
and the product, the economy of use and a longer functioning lifetime.
• Although the carefully studied design and the risk analysis done by our company has permitted the re-
alization of a safe product, in any case, before effecting any operation on the stove, it is recommended
to keep said manual available and pay scrupulous attention to the instructions written therein.
• Be very careful when moving the ceramic details where present.
• Check the precise flatness of the pavement where the product will be installed
• The wall where the product will be placed must not be constructed in wood, or in any case, made of
an inflammable material, and in addition it is necessary to maintain a safety distance.
• While the stove is in operation, several parts of the stove (door, handle, sides) can reach high tempera-
tures. Therefore pay attention and use the proper precautions, above all in the presence of children,
elderly or disabled persons, and animals.
• Assembly must be performed by authorized persons (Authorized Assistance Center).
• Diagrams and drawings are furnished for the purpose of illustration; the manufacturer, with the intent
of pursuing a policy of constant development and renewal of the product can, without any notice,
make any modifications that are believed opportune.
• When the stove is working at its maximum speed, it is strongly suggested to wear gloves while han-
dling with the door for pellets loading and the door handle.
• It is prohibited to install in bedrooms or in explosive environments.
• Only use replacement parts recommended by the supplier.
Never cover the body of the stove in any way or obstruct the openings placed on
the upper side when the device is operating. All our stoves are trial lighted on
the construction line.
In the event of a fire, disconnect the power supply, use an extinguisher and call the fire fight-
ers if necessary. After that contact the Authorized Assistance Center.
This instruction booklet is an integral part of the product: make sure that it always accompanies the
appliance, even in case of transfer to another owner or in the case of transfer to another place. In the
event of damage or loss, request a copy from the area technician.
These symbols indicate specific messages in this booklet:
ATTENTION: This warning sign indicates that the message to which it refers should be
carefully read and understood, because failure to comply with what these notices
say can cause serious damage to the stove and put the user's safety at risk.
INFORMATION: This symbol is used to highlight information which is important for proper
stove operation. Failure to comply with these provision will compromise use of the stove
and its operation will not be satisfactory.
Hermetic stove_PDA
Code 001246
1