Vortice VORT HRI PHANTOM Betriebsanleitung Seite 37

ENGLISH
Alarm: No Frost - Wait one hour
The device is provided with temperature probes which measure air temperature.
If temperatures are too low, "No Frost", "Alarm!" "Block!" appear on the "HOME" page and the following note appears on
the "Alarm" page: "Wait 1 hour". Press the [] appare:
Alarms
No Frost
Alarm: "Ext Probe fault"
Equipment is provided with a temperature probe which measures the temperature of air incoming from the outside. The
probe fault causes the message "Alarm!" to appear on the "HOME" page and the following note appears on the "Alarms"
page: "Ext Probe call service". Press the [] key and the following will appear:
Call Customer service to request assistance from technical personnel.
Alarm: Int Probe fault
The device is provided with a temperature probe which measures the temperature of air being released inside. The probe
fault causes the message "Alarm!" to appear on the "HOME" page and the following note appears on the "ALARM" page:
"Int probe Call Service". Press the [] key to access the "ALARM' menu and the following will appear:
Alarm: Exh Probe fault
The device is provided with a temperature probe which measures the temperature of air expelled from the inside.
Press the [] key to access the "ALARM' menu and the following will appear:
Call Customer service to request assistance from technical personnel.
No frost
Wait
1 Hour
[ ▲ ]
[ ▲ ]
[ ▲ ]
[ ▲ ]
[ ▲ ]
9 9 9 9
[ ]
[ ]
9 9
9 9
[ ] [ ]
9 9
9 9
[ ] [ ] ]
SI
9 9 9 9
[ ] ]
[ ]
NO
37