Scheppach 5903816952 Originalbetriebsanleitung Seite 19

e. Do not overreach. Keep proper footing and
balance at all times. This enables better con-
trol of the power tool in unexpected situations.
f. Dress properly. Do not wear loose cloth-
ing or jewellery. Keep your hair and cloth-
ing away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
g. If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
h. Do not allow yourself to get lulled into a false
sense of security and do not ignore the safety
rules for power tools, even if you are familiar
with the power tool after repeated use. A care-
less action can cause severe injury within a
fraction of a second.
4. Power tool use and care
a. Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
b. Do not use the power tool if the switch does
not turn it on and off. Any power tool that can-
not be controlled with the switch is dangerous
and must be repaired.
c. Disconnect the plug from the power source
and/or remove the battery pack, if detach-
able, from the power tool before making
any adjustments, changing accessories, or
storing power tools. Such preventive safety
measures reduce the risk of starting the power
tool accidentally.
d. Store idle power tools out of the reach of
children, and do not allow persons unfamil-
iar with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e. Maintain power tools and accessories.
Check for misalignment or binding of mov-
ing parts, breakage of parts and any other
condition that may affect the power tool's
operation. If damaged, have the power tool
repaired before use. Many accidents are
caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g. Use the power tool, accessories and tool
bits, etc., in accordance with these instruc-
tions, taking into account the working
conditions and the work to be performed.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Use of the power tool for operations different
from those intended could result in a hazardous
situation.
h. Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unex-
pected situations.
5. Service
a. Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
b. Always arrange for the replacement of the
plug or the power cord to be carried out by
the manufacturer of the appliance or by his
approved customer services. This will ensure
that the safety of the power tool is maintained.
Appliance-specific safety instructions:
• Secure the workpiece. A workpiece securely held
by a clamping device or vice is much safer than
one held in your hand.
• Do not rest your hands next to or in front of the
appliance and the area being worked as there is a
risk of injury if you slip.
• In the event of danger, remove the mains plug
from the socket immediately.
• Always route the power cable towards the rear,
away from the appliance.
• RISK OF FIRE DUE TO FLYING SPARKS! If you
sand metal, sparks will be produced. Therefore,
make sure that nobody is at risk and that no com-
bustible materials are located in the immediate
vicinity of where you are working.
• Hold the power tool by the insulated gripping
surfaces, as the grinding surface could hit its
own cable. Damage to a live wire may make ex-
posed metal parts of the power tool live and could
give the operator an electric shock.
m WARNING! TOXIC VAPOURS! Working with the
tool can produce harmful/ toxic dusts that represent
a health hazard for the person operating the appli-
ance and for any other people in the area.
m WARNING! RISKS DUE TO DUST! When
working for extended periods of time on wood and,
in particular, materials that produce dust which is
hazardous to health, connect the appliance to an
appropriate external dust extraction appliance. Wear
safety goggles and a protective dust mask!
• Ensure sufficient ventilation when working on
plastics, paints, lacquers, etc.
GB | 19