Usb Operation; Troubleshooting - Renkforce 2366444 Bedienungsanleitung

h) USB operation
1. Insert the USB device.
2. Press the button repeatedly on the unit or press the USB button on the remote control to select USB mode.
3. During playback:
- To pause or resume play, press the
- To skip to the previous/next file, press the
Tips:
• The unit can support USB devices with up to 32 GB of memory.
• The unit only supports MP3 files.
i) Troubleshooting
Never attempt to repair the unit yourself, as this will void the warranty. If you encounter problems when using this unit,
check the following table before contacting customer service.
There is no power
The remote control does not work
42
button on the remote control.
buttons on the remote control.
/
• Ensure that the AC cable is properly connected.
• Ensure that there is power at the AC outlet.
• Press the (standby) button to turn the unit on.
• Select the correct source before pressing a playback button.
• Reduce the distance between the remote control and the unit.
• Insert the battery with its polarities (+/-) aligned as indicated.
• Replace the battery.
• Aim the remote control directly at the sensor on the front of the unit.