Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
Bluetooth
speaker "BlackGlobe1"
®
Item no. 1577042
Intended use
This product is designed to stream music from a Bluetooth
card. It is powered by a lithium-ion rechargeable battery and features a 3.5 mm jack input, which allows you
to play music from devices with an analogue auxiliary output. You can also use the speaker to answer calls
from a connected mobile device.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g. in bathrooms)
must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the product for
purposes other than those described above may damage the product. In addition, improper use can cause
hazards such as a short circuit, fire or electric shock. Read the instructions carefully and store them in a safe
place. Make this product available to third parties only together with its operating instructions.
This product complies with statutory national and European regulations. All company and product names are
trademarks of their respective owners. All rights reserved.
Bluetooth
is a worldwide registered trademark of Bluetooth SIG, Inc.
®
Delivery content
• Bluetooth
speaker
®
• 3.5 mm AUX cable (0.45 m)
• USB cable (31 cm)
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code on this page.
Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle indicates that there is a risk to your health, e.g. due
to an electric shock.
This symbol is used to highlight important information in these operating instructions. Always
read this information carefully.
This symbol indicates special information and advice on how to use the product.
Safety information
Read the operating instructions and safety information carefully. If you do not follow the
safety instructions and information on proper handling in this manual, we will assume no
liability for any resulting personal injury or damage to property. Such cases will invalidate
the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly, as it may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent unauthorized
use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Always observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or an authorized repair
centre.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
b) Rechargeable battery
• The rechargeable battery is built into the product and cannot be replaced.
• Never damage the rechargeable battery. Damaging the casing of rechargeable batteries may
cause an explosion or a fire!
• Never short-circuit the contacts of the rechargeable battery or throw the battery or product into
open flames. This may cause a fire or explosion!
• Charge the battery regularly, even when you are not using the product. You do not need to
discharge the battery before recharging it.
• Never leave the battery unattended when it is charging.
• Place the product on a heat-resistant surface before charging the battery. The product may
become warm when the battery is charging.
device. It can play audio files from a microSD
®
c) Persons and product
• Never pour any liquids over electrical devices or place objects filled with liquid next to the
product. If liquid or an object does enter the interior of the device, power down the respective
socket (e.g. switch off the circuit breaker), and then remove the mains plug from the mains
socket. Discontinue use and take the product to a specialist repair centre.
• Never use the product immediately after it has been brought from a cold room into a warm
one. The condensation generated may destroy the product. Allow the product to reach room
temperature before connecting it and putting it to use. This may take several hours.
• When setting up the product, make sure that the cables are not pinched, kinked or damaged
by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them. This may
cause an injury.
• Do not listen to loud music for long periods of time, as this may cause hearing damage.
Product overview
5
1
4
3
2
1
Microphone
3
SD card slot
5
LED indicator
7
Multifunction button
9
On/off button
Operation
a) Charging the internal battery
• Fully charge the battery before using the speaker for the first time.
• Recharge the battery when the LED indicator (5) stops working.
• Insert the micro USB plug into the micro USB port (2) on the product, and then connect the USB-A plug on
the micro USB cable to a USB power source (e.g. USB power adapter). Charging will start automatically
when the USB power source delivers a current.
• Plug the USB power adapter into a mains socket.
• The LED indicator (5) will turn red to indicate that the battery is charging.
• The LED indicator (5) will turn off when the battery is fully charged.
• Unplug the power adapter from the mains and disconnect the product from the USB power adapter
(or other USB power source).
b) Turning the speaker on/off
• Press the on/off button
(9) to turn on the speaker. The LED indicator (5) flashes when the speaker
is not paired with a Bluetooth
device, and stays constant when a Bluetooth
®
speaker will play a notification tone to indicate that it is turned on.
• To turn off the speaker, press the on/off button
off, and the speaker will play a notification tone to indicate that it is switching off.
c) Pairing the speaker with a Bluetooth
• The speaker needs to be paired with a Bluetooth
• Place the speaker and your Bluetooth
audio device at a distance of approximately 1 m from one another
®
and avoid interferences that may affect signal transmission (for example, do not place the devices near
strong electromagnetic fields or metal objects or behind reinforced concrete walls).
• Ensure that Bluetooth
is enabled and that the Bluetooth
®
Bluetooth
drivers installed. Visit the manufacturer's website to download and install the latest drivers.
®
• Turn on the Bluetooth
device and enable pairing mode (if necessary).
®
• Follow the instructions for your Bluetooth
the manufacturer and design. Your device will search for available Bluetooth
• Press and hold the on/off button
(9) to turn on the speaker.
• Press the on/off button
(9) repeatedly until Bluetooth
notification tone to indicate that Bluetooth
is no Bluetooth
connection.
®
• Select "TWNT-P087" on your Bluetooth
®
• You may be prompted to enter a password. Enter the password (or try using "0000") and confirm your
entry.
• The LED indicator (5) will stay constant when the devices are paired via Bluetooth
play a notification tone.
• Another notification tone will be played if the Bluetooth
• If pairing fails, turn off the speaker and try pairing the devices again.
6
7
2
Micro USB port
4
3.5 mm analogue jack input
6
- button
8
+ button
device is connected. The
®
(9) for 3–5 seconds. The LED indicator (5) will turn
device
®
device in order to stream audio.
®
device you want to pair has all of the necessary
®
device to pair it with the speaker. These may vary depending on
®
devices.
®
mode is enabled. The speaker will play a
®
mode is enabled. The LED indicator (5) will flash blue if there
®
device (e.g. mobile phone or laptop) to pair it with the speaker.
®
connection is interrupted.
®
8
9
, and the speaker will
Werbung
Inhaltsverzeichnis
