Adjusting The Brightness; Aux/Optical/Coaxial/Hdmi Operation; Bluetooth Operation; Pairing Bluetooth-Enabled Devices - Renkforce 2366444 Bedienungsanleitung

9) Adjusting the brightness

- Press the DIMMER button on the remote control to select the brightness level.
f) AUX/OPTICAL/COAXIAL/HDMI operation
1. Ensure that the unit is connected to the TV or audio device.
2. Press the button repeatedly on the unit or the AUX, OPT/COA, HDMI 1/2, HDMI eARC buttons on the remote
control to select the desired mode. The selected mode will show on the display.
3. Operate your audio device directly for playback features.
4. Press the VOL +/– button to adjust the volume to your desired level.
Tip:
• The unit may not be able to decode all digital audio formats from the input source. In this case, the unit will mute.
This is NOT a defect. Ensure that the audio setting of the input source (e.g., TV, game console, DVD player, etc.)
is set to PCM or Dolby Digital with HDMI 1 / HDMI 2 / HDMI ARC / OPTICAL / COAXIAL input (refer to the user
manual of the input source device for details on the audio settings).
• When the DOLBY ATMOS audio format is selected, the soundbar display will show DOLBY ATMOS.
• When the DOLBY DIGITAL PLUS/DOLBY True HD audio is selected, the soundbar display will show DOLBY
SURROUND.
• When entering non-PCM or DOLBY DIGITAL audio formats, if there is no sound output from the unit, the display
will show NO SUPPORT.
• The full Dolby Atmos experience is only available when the soundbar is connected to the source via an HDMI
2.0 cable.
• The soundbar will still function when connected via other methods (such as a digital optical cable) but these are
unable to support all of the Dolby features. We therefore recommend connecting via HDMI in order to ensure full
Dolby support.
g) Bluetooth operation

1) Pairing Bluetooth-enabled devices

You will need to pair your Bluetooth device with the unit when connecting for the first time.
Note:
- The operational range between this player and a Bluetooth device is approximately 8 metres (provided that
there are no obstacles between the Bluetooth device and the unit).
- Ensure that you are familiar with the device's capabilities before connecting it to the unit.
- Some Bluetooth devices may not be compatible.
- Obstacles between the unit and the Bluetooth device may reduce the operational range.
- If the signal strength is weak, the Bluetooth receiver may disconnect and re-enter pairing mode automatically.
1. In ON mode, press the
mode. "NO BT" will show on the display if the unit is not paired with a Bluetooth device.
2. Activate your Bluetooth device and search for Bluetooth devices. "RF-SB-301" will appear in the list of Bluetooth
devices.
40
button repeatedly on the unit or the BT button on the remote control to select Bluetooth