Operation
a) Switching On/Off
•
Switch on the soundbar with the POWER (17) mains switch (set switch to ON position).
•
The display shows four dashes to indicate that the device is in stand-by mode.
•
Switch on your connected devices.
•
Switch on the soundbar with the ST-BY (1) button at the device or the STAND BY (12) button on the remote
control.
•
To switch off the soundbar into standby mode, press with the ST-BY (1) button at the device or the
STAND BY (12) button on the remote control.
•
Switch off the connected devices only afterwards.
•
If you do not wish to use the soundbar for an extended period of time, switch it off by the POWER (17) mains
switch.
b) Volume Control
•
Set the desired volume with the buttons VOL- (4)/VOL+ (5) at the device or the buttons VOL (15)/VOL (11).
•
The volume settings are displayed in the right half of the display using figures (00 to 50).
•
Press the MUTE (6) button on the remote control to mute playback for a short time.
•
Press the MUTE (6) button on the remote control again to return volume to the previously set value.
•
The display flashes when the MUTE switch is activated.
Display:
AU.00
>
AU.50
>
26
lowest volume
highest volume
Operating Instructions
English